76® LUBRICANTS 0W-20

Full Synthetic, Fuel Saving Engine Oil

76 LUBRICANTS 0W-20 is a full synthetic, fuel saving engine oil that has been formulated to protect your engine and keep it running reliably and efficiently.

76 LUBRICANTS 0W-20 meets the stringent requirements of ILSAC GF-6A and API SP. This ensures that 76 LUBRICANTS 0W-20 can withstand the challenging operating environment of a modern turbocharged gasoline direct-injection engine.

Available in 4, 3 and 1 liter packages in:
Application

Always use the correct engine oil for your vehicle. By following the vehicle manufacturer’s recommendation for viscosity grade, performance level and oil drain interval period you will maintain the reliability and efficiency of your vehicle. This information can be found in your owner’s handbook.

FUEL ECONOMY

Meets the latest requirements for fuel efficiency, ensuring your car’s engine uses less fuel to help minimize its environmental impact.

WEAR PROTECTION

Protects and lubricates essential parts of your vehicle’s engine to ensure efficient and reliable operation.

ENGINE CLEANLINESS

Protects against the formation of harmful deposits which can adversely impact the efficient operation of your vehicle.

OIL FLOW

Resists thermal breakdown, ensuring the engine oil can be pumped throughout the engine to provide protection.

GF6: A performance upgrade for your engine

Replacing GF-5 and delivering a significant upgrade in engine performance and efficiency, 76 LUBRICANTS ILSAC GF-6 engine oils ensure modern and next generation engines can reach their full potential.

76 LUBRICANTS engine oils
are supported by extensive field-testing and are proven to perform.

Choose the right oil for your vehicle

ILSAC GF-6A replaces ILSAC GF-5 and delivers a new level of performance, efficiency and protection for spark-ignited internal combustion engines. Make sure you look for the starburst certification mark.

ILSAC GF-6B delivers further fuel efficiency benefits compared to ILSAC GF-6A and can be identified by the API shield certification mark. GF-6B is only available in a SAE 0W-16 viscosity grade and may not be suitable for use in some vehicles.

Remember to check your owner’s handbook and use the correct 76 LUBRICANTS engine oil for your vehicle.

Properties and Specifications

76 LUBRICANTS 0W-20 has been approved against the requirements of the latest ILSAC and API performance categories:

  • ILSAC GF-6A
  • API SP

These performance categories have been designed to include the requirements of previous categories and 76 LUBRICANTS 0W-20 may also be used in applications where an SAE 0W-20 engine oil meeting any of the following specifications are also required:

  • ILSAC GF-5
  • ILSAC GF-4
  • ILSAC GF-3
  • ILSAC GF-2
  • ILSAC GF-1
  • API SN PLUS
  • API SN
  • API SM
  • API SL
  • API SJ
  • API SH
  • API SG
  • API SE
  • API SF
76 LUBRICANTS 0W-20 Properties
Property Method Unit 76 LUBRICANTS 0W-20
Relative Density @ 15°C ASTM D4052 g/ml 0.8456
Kinematic Viscosity @ 100°C ASTM D445 cSt 8.26
Kinematic Viscosity @ 40°C ASTM D445 cSt 42.96
Cold Cranking Viscosity (CCS) @ -35°C ASTM D5293 cP 5431
Viscosity Index ASTM D2270 - 171
Pour Point ASTM D5950 °C -45
Flash Point (PMCC) ASTM D93 °C 199
Sulphated Ash ASTM D874 % wt 0.68

Technical Data Sheet Safety Data Sheet

Health and safety recommendations for this product can be found on the Safety Data Sheet (SDS).

Typical properties are average values only and do not constitute a specification. Minor variations that do not affect product performance are to be expected during normal manufacture, and at different blending locations. Product formulation is subject to change without notification.

76 is a registered trademark owned by Phillips 66 Company and licensed by Sanbrea K.K.